|
|
|
|
HB305S
3-phase hybrid stepping driver
一、Features
- AC24～50V or DC36～70V DC Supply
- Max 6A Phase Current Output
- Using the AC servo motor current control modes to achieve a precise breakdown of the sinusoidal output current, completely solve the traditional stepper motor system low resonance, operating noise, small high-speed torque , low frequency starting shortcomings of stepper motor system and to be comparable to AC servo system.
- Robust to Parameters of Stepper Motors
- Selectable Microstep(8- switch)
- Disable control (Free)
- Holding Position when repowered
- Static Half Current Lock
- Isolated Input （Photo-coupler）
|
 |
二、Adapter
Motors
57、70、86、90BYG Series 3-phase hybrid stepper motors
三、Inputs &
Outputs
|
Label |
Function |
Note |
| CP+ |
Pulse Signal + |
Photo-coupler Input resistance 390 Ω, Rated 5V, 12mA, 2us minimum pulse width |
| CP- |
Pulse Signal - |
|
CW+ |
Direction Signal + |
|
CW- |
Direction Signal - |
| FREE+ |
Disable Signal + |
Photo-coupler ON: disable Output; OFF: Enable Output |
| FREE- |
Disable Signal - |
|
ERR-C |
Error Output C of OC Gate |
Photo-coupler OC Output （Max 50V/20mA）。When error, C and E is short. |
|
ERR-E |
Error Output E of OC Gate |
|
COM |
Common Ground |
common ground of CP, CW, FREE |
| POWER |
Power Indicator led |
Red |
| TIMING |
Phase Origin Indicator Led |
Green |
| ERROR |
Error Indicator led |
Red |
|
A |
A Output |
|
|
B |
B Output |
|
|
C |
C Output |
|
| AC40V |
Power Supply |
Rated AC40V（AC24～50V/DC36～70V）,3A |
Note: non 5V signal request corresponding increase in external resistor (about 10mA Current)
四、Current Settings
Label |
Function |
Note |
| CURRENT |
Current setting |
Clockwise larger |
| TEST |
reserved |
|
五、Resolutions
DIP （1 2 3） |
MODE A(steps/tooth) |
MODE A(steps/tooth) |
000 |
240 |
200 |
001 |
120 |
100 |
010 |
80 |
50 |
011 |
60 |
40 |
100 |
48 |
25 |
101 |
40 |
20 |
110 |
24 |
10 |
111 |
12 |
保留 |
Note：DIP “ON”=0, other Resolutions can be customized.
六、Connection
七、Dimensions
|